> For the complete documentation index, see [llms.txt](https://www.mrmansfield.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.mrmansfield.org/3d-printers/form-labs/curing.md).

# Curing

Though our Resin cured in the printing process, it is not entirely cured yet

### Be sure you have rinsed your print

### Remove any supports you no longer want

The plastic is soft right now, which makes cutting off supports and sanding much easier at this stage.

### Put your piece in the Form Cure L

![](https://716002489-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTJiXw7nWbpims86FZHCL%2Fuploads%2FuVdEzU4nLp4sM3aTSiEy%2FScreenshot%202023-07-03%20at%202.52.24%20PM.png?alt=media\&token=34d48d13-f845-448d-84b2-83b62ab46be9)

It looks like a microwave, but it is going to bombard the print with UV light to finish curing any resin. Wait until the cycle is done; and then you are too!