> For the complete documentation index, see [llms.txt](https://www.mrmansfield.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.mrmansfield.org/3d-printers/stratasys.md).

# Stratasys

You need to use a PC in the lab, and it needs to have a program called GrabCAD installed on it

<figure><img src="/files/ygpIEdlPdsgHCwdhGXmZ" alt=""><figcaption></figcaption></figure>

Then you have to login&#x20;

<figure><img src="/files/HVOATZXk468WiqcuUDBM" alt=""><figcaption><p>tomorrowlabs@creightonprep.org   GoPrep!</p></figcaption></figure>

The login is: <tomorrowlabs@creightonprep.org>  Password: GoPrep!

## Then you need to connect to the printers IP address: 192.168.1.32 This will insure you have the correct layout and filiment selected (it does it automatically if you are connected to the printer)

Then you need to add your STL model(s)

<figure><img src="/files/5URyNY3Sx3t0qkfoiXpc" alt=""><figcaption></figcaption></figure>

## Move your print using the orient, scale, and arrange tools on the tool bar

<figure><img src="/files/zxKdxMh7izbPrjCydPta" alt=""><figcaption></figcaption></figure>

When done hit print- head to the Stratasys and follow the on screen instructions

{% embed url="<https://drive.google.com/file/d/10rbDfzG9zMQ9HlQdBbtMGgiaactJ4oUg/view>" %}